Large Format Tile Back Glue

Two‑Component Tile Primer for Tiles Over 1.5m, 3‑in‑1: Bonding / Roughening / Waterproof

Caberry Large Format Tile Back Glue is a two‑component system consisting of powder + emulsion, specially engineered for big slabs over 1.5 m. It creates a high‑adhesion rough interface on the back of low‑absorption dense tiles, greatly improving the bonding between tile and tile adhesive / mortar, and integrates anti‑water performance. Ideal for vitrified tile, antique tile, microcrystalline stone and marble.

• Package: 8 kg set (powder + emulsion, two‑component)
• Coverage: 1 kg for 2–3 m²
• Best for: Large slab tiles above 1.5 m

• Vitrified tiles, antique tiles, microcrystalline stone, marble and other low‑water‑absorption large format tiles.
• Interior & exterior wall and floor tiling, solves easy hollowing and falling risks of big dense tiles.

• Working temperature: 5 ℃ – 40 ℃.
• Do NOT add water. Do not mix with other additives or materials.
• Mixed material must be used within around 3 hours; hardened mixture cannot be reused.
• Coating cannot be too thin, otherwise tile detachment risk rises.
• Mix for more than 5 minutes to avoid sedimentation.

• Package: Plastic bucket, 8kg/set, powder + emulsion inside.
• Storage: Sealed, cool and dry place; avoid freezing and direct sunlight.
• Trade Terms: EXW, FOB Guangzhou, CIF, DDP available.

Full documents for import and tender:

• ✅ TDS Technical Data Sheet
• ✅ MSDS / SDS Safety Data Sheet
• ✅ Bond strength test report
• ✅ Factory quality certificate

Sample set can be arranged for field tiling test.

Sample policy: Sample cost and freight borne by buyer.

Q: What tile size is this back glue for?
A: It is specially developed for large slab tiles over 1.5 meters.

Q: Can I add extra water to dilute it?
A: No, adding water will destroy the formula and reduce bonding strength.

Q: Can it be used on marble?
A: Yes, suitable for marble, microcrystalline stone, vitrified tiles and other dense stone & tiles.

Q: How long can I use the mixed slurry?
A: Approximately 3 hours, depending on ambient temperature.

Q: Can you supply English TDS and MSDS?
A: Yes, complete English technical documents ready for customs clearance.