CABERRY
penetrating crystalline waterproof coating CABERRY
penetrating crystalline waterproof coating CABERRY
Couldn't load pickup availability
Permeable Crystalline Waterproof Coating
Concrete Penetrating Crystalline Waterproof Material | Caberry Waterproof
Product Overview
Caberry permeable crystalline waterproof coating uses silicate cement as the base material, compounded with active chemical agents including catalysts and penetrants. When applied onto concrete, the active ingredients react with free calcium ions and moisture inside the concrete, generating water-insoluble needle-shaped crystals. These crystals seal internal capillaries and microcracks to deliver permanent waterproof performance.
Key Advantages
✅ Deep Penetration & Crystallization
Reacts with concrete internally instead of only forming a surface film.
✅ Self-Healing for Fine Cracks
Continuous crystal growth can block new tiny cracks when water invades later.
✅ Long-Term Waterproof Durability
Waterproof function integrates with concrete matrix, not easy to peel off.
✅ Ideal for Concrete Structures
Perfect for basement, tunnel, water tank, underground concrete structures.
Application Scope
- Basement concrete slab & wall waterproofing
- Water tank, reservoir, sewage tank concrete lining
- Subway, tunnel, underground pipe gallery
- Bridge, dam and other hydraulic concrete structures
Crystalline Waterproofing Coating – Technical Product Profile
Caberry penetrating crystalline waterproofing coating is a cement-based waterproofing material designed for suitable concrete structures. It combines a cementitious base with active chemical compounds that react in the presence of moisture and suitable compounds within concrete, forming insoluble crystalline deposits in accessible pores and capillary pathways.
This product is also described as penetrating crystalline waterproofing material, cementitious crystalline waterproofing coating, or concrete crystalline waterproofing treatment. Its waterproofing mechanism is based on an internal crystalline reaction rather than relying solely on a conventional surface waterproof membrane.
| Product Name | Permeable Crystalline Waterproof Coating |
| Product Category | Cementitious Crystalline Waterproofing Material |
| Waterproofing Mechanism | Penetrating Chemical Reaction and Crystalline Formation |
| Main Substrate | Suitable Cement-Based Concrete |
| Application Method | Brush or Other Approved Application Method |
| Mixing Ratio | Powder : Water = 1 : 0.25 (subject to product TDS) |
| Brand | Caberry |
| Supply Type | Manufacturer Direct Supply – Bulk and Project Orders |
Note: Final technical specifications, application methods and performance values should be confirmed against the current manufacturer Technical Data Sheet (TDS).
How Does Penetrating Crystalline Waterproofing Work?
Crystalline waterproofing technology works through a chemical reaction inside suitable concrete substrates. When the coating comes into contact with moisture and reactive compounds in concrete, its active ingredients migrate into accessible pores and capillary pathways.
Surface Application
The cementitious crystalline waterproof coating is applied to a properly prepared and pre-wetted concrete surface.
Active Chemical Penetration
Active chemical components enter accessible concrete capillaries and react with moisture and suitable compounds inside the substrate.
Crystalline Formation
Insoluble crystalline deposits develop within accessible pores and capillary pathways.
Reduced Water Penetration
The crystalline deposits help reduce water movement through the treated concrete structure.
This technology is particularly relevant to underground concrete waterproofing, basement waterproofing, water-retaining structures and infrastructure projects where concrete permeability needs to be reduced.
Engineering Applications of Crystalline Waterproofing Material
Penetrating crystalline waterproofing is commonly considered for concrete structures exposed to groundwater, soil moisture, water pressure or continuous water contact. The following applications should be assessed according to structural conditions and project specifications.
Concrete Substrate Requirements and Application Limitations
Proper substrate preparation is essential for the performance of penetrating crystalline waterproofing materials. Before application, the concrete surface should be evaluated for soundness, cleanliness, moisture condition and existing defects.
Recommended Conditions
- Sound and properly cured concrete.
- Clean surfaces free from oil, dust and loose materials.
- Pre-wetted concrete with a saturated surface-dry condition.
- Open and accessible concrete pores.
- Properly repaired honeycombs and surface defects.
Conditions Requiring Attention
- Moving structural cracks and expansion joints.
- Severe active water leakage requiring prior treatment.
- Loose, contaminated or deteriorated concrete.
- Non-cementitious or inaccessible coated substrates.
- Structural movement beyond the product's capabilities.
Important: Crystalline waterproofing is not a replacement for structural crack repair, joint waterstops or a complete movement-joint waterproofing system. The correct repair and waterproofing method should be selected according to the actual leakage condition and project design.
Crystalline Waterproofing vs. Conventional Waterproof Coatings
Selecting the right waterproofing material depends on substrate type, water exposure, structural movement and the intended finishing system. Crystalline waterproofing and conventional membrane-forming coatings serve different functions.
| Comparison | Crystalline Waterproofing | Film-Forming Waterproof Coating |
|---|---|---|
| Main Mechanism | Internal crystalline reaction | Surface waterproof membrane |
| Main Substrate | Suitable concrete | Depends on coating type |
| Crack Bridging | Not designed to bridge moving cracks | Depends on membrane flexibility and specification |
| Typical Uses | Concrete basements, tanks and underground structures | Roofs, bathrooms, balconies and other specified areas |
| Protection Mechanism | Reduces water penetration through concrete pores | Creates a continuous surface barrier |
Technical Data Sheet, SDS and Quality Documentation
For international construction material procurement, technical documentation is important for product evaluation, contractor approval and project specification review. Caberry can provide relevant product documentation according to the actual product and order requirements.
TDS – Technical Data Sheet
Product characteristics, application procedures, consumption and available performance data.
SDS / MSDS
Product handling, storage, safety and transportation information.
Test Reports
Relevant laboratory test reports and performance documentation, where available.
Project Support
Technical information for distributors, waterproofing contractors and construction project procurement teams.
Crystalline Waterproofing Manufacturer and Wholesale Supplier
Caberry is a waterproofing materials manufacturer based in Guangzhou, China, supplying construction waterproofing products for international markets.
We support overseas building material distributors, waterproofing contractors, importers, engineering companies and project procurement teams looking for crystalline waterproofing materials and other concrete waterproofing solutions.
International Supply and OEM Cooperation
- Direct manufacturer communication.
- Bulk orders for construction projects.
- Packaging and labeling discussions.
- Product documentation for technical evaluation.
- OEM and private-label requirements, subject to confirmation.
- Technical support for product selection and application.
Whether you are sourcing crystalline waterproofing powder for a local distribution business or evaluating concrete waterproofing materials for a large infrastructure project, our team can help you review the appropriate product specifications and supply requirements.
Construction Instructions
- Clean the substrate thoroughly, then wet the surface. Mix powder with water at ratio: powder : water = 1 : 0.25, stir evenly and apply. Spray water for curing after drying (normally 3–4 hours).
- Do NOT construct when temperature below 0°C or above 35°C; avoid high-temperature construction.
- Storage & transportation temperature: 5°C ~ 35°C.
- Arrange construction when no rain or snow within 4 hours.
- No foot traffic or vehicle driving before full curing or asphalt overlay.
- Clean tools with water immediately after use for reuse.
Frequently Asked Questions About Penetrating Crystalline Waterproofing
What is penetrating crystalline waterproofing?
Penetrating crystalline waterproofing is a concrete waterproofing technology that uses active chemical compounds to form insoluble crystals within accessible concrete pores and capillaries, helping reduce water penetration through the concrete.
Is crystalline waterproofing suitable for underground basements?
It can be used on suitable concrete basement walls and slabs as part of a waterproofing design. Actual suitability depends on groundwater pressure, concrete condition, structural joints and project specifications.
Can crystalline waterproofing be applied to damp concrete?
Yes. The specified pre-wetted or saturated surface-dry condition is generally required for this type of crystalline reaction. Standing water and active leakage should be addressed according to the product TDS.
Does crystalline waterproofing replace a waterproof membrane?
Not in every application. Crystalline waterproofing and membrane systems have different functions. Some projects may require a combined waterproofing system based on design requirements and exposure conditions.
What is the coverage rate of crystalline waterproofing coating?
Coverage depends on the specified application rate, concrete surface profile and number of coats. Please request the current Caberry TDS for the confirmed consumption per square meter.
Can crystalline waterproofing withstand positive and negative water pressure?
Suitability for positive-side or negative-side water pressure must be verified against the product's laboratory test results and project specifications. Request the relevant test data before specifying the product for a pressurized structure.
How can I purchase crystalline waterproofing materials in bulk?
Contact Caberry with your destination country, estimated order quantity, packaging requirements and project application. Our sales team can discuss product specifications, quotations and international supply.
FAQ
Q: What is the difference between crystalline coating and normal film-forming waterproof paint?
A: Ordinary waterproof coatings form a membrane on the surface. Penetrating crystalline material reacts chemically inside concrete, becoming part of the concrete itself.
Does the concrete surface need to stay wet during construction?
A: Yes, saturated surface dry condition is required; sufficient moisture is essential for crystallization reaction.
Can you provide TDS, MSDS and relevant test certificates?
A: Yes, complete technical documents are available for import clearance and tender submission.
Looking for a Reliable Crystalline Waterproofing Supplier?
Tell us about your concrete waterproofing project. Caberry can help you evaluate product suitability, technical specifications, packaging and bulk supply options.
Information to Include in Your Inquiry
- Country and project location.
- Project type: basement, tunnel, water tank or other concrete structure.
- Estimated quantity or required coverage area.
- Concrete condition and water exposure.
- Required packaging and delivery destination.
- Whether TDS, SDS or test reports are required.
Caberry Waterproofing Materials Manufacturer | Guangzhou, China
Get Quotation & Technical Support
If you need bulk price, custom packaging or construction technical guidance, please contact us directly.
