CABERRY
single component JS polymer cement waterproof coating
single component JS polymer cement waterproof coating
受取状況を読み込めませんでした
JS Polymer Cementitious Waterproof Coating
Single Component Pure Latex JS Waterproof Coating | Caberry Waterproof
Product Overview
This single-component pure latex JS polymer cementitious waterproof coating is a flexible polymer emulsion. It is mixed with cement at a ratio of 1:1 on site. After curing, it forms a tough, elastic, water-resistant membrane with excellent adhesion to cement substrates. Suitable for both indoor and outdoor civil & infrastructure waterproofing projects.
Key Advantages
✅ Flexible Polymer Membrane
Good elongation, can adapt to minor substrate deformation and fine cracks.
✅ On-Site Mixable
Pure latex, mixed with ordinary cement at 1:1 ratio, flexible material allocation.
✅ Strong Adhesion
Firmly bond with concrete, brick, blocks and precast cement structures.
✅ Eco-Friendly & Safe
Non-toxic formula, applicable for swimming pools, water tanks and sewage pools.
Application Scope
- Concrete, brick wall, concrete block and precast structure waterproofing
- Bathroom, kitchen, shower room, balcony indoor waterproof works
- Swimming pool, water tank, domestic sewage pool anti-seepage
- Basement, elevator shaft, subway station, mine and tunnel waterproofing
- Indoor and outdoor waterproof projects for infrastructure & civil buildings
Construction Guide
- Clean the base surface thoroughly, keep it flat and free of contaminants. Dampen the substrate properly, no standing water allowed.
- Mix JS pure latex and cement at 1:1 ratio, stir uniformly. Keep intermittent stirring during application to prevent sedimentation.
- Construct in separate layers. The second coat shall be brushed perpendicular to the first coat.
- Each single layer thickness ≤ 1 mm. Build total thickness according to project waterproof grade requirements.
FAQ
Q: What is the difference between single-component pure latex JS and two-component JS?
A: This single-component pure latex needs to be mixed with cement on site, more flexible for bulk engineering use; two-component JS comes with pre-matched powder & liquid for direct mixing.
Q: Can this JS coating be used for swimming pools?
A: Yes, after correct mixing, layered construction and full curing, it is suitable for swimming pools and water storage structures.
Q: Can you supply TDS, MSDS and test certificates?
A: Sure, we provide complete technical documents for customs clearance, tender and site inspection.
Get Quotation & Technical Support
If you need bulk price, custom packaging or construction technical guidance, please contact us directly.