CABERRY
CABERRY Floor Surface Treatment Agent
CABERRY Floor Surface Treatment Agent
受取状況を読み込めませんでした
Floor Primer | Ground Hardener
Water-Based Cement Floor Consolidating Sealer, Anti-Dust & Anti-Sand Base Treatment Agent Manufactured by Guangzhou Jiabaili Waterproof Engineering Co., Ltd.
Penetrates 3-5mm into porous cement floor, locks loose sand and cement particles permanently, completely solves floor dusting, sand flaking and powdering problems.
Forms a dense sealed protective layer, blocks floor capillary water and alkaline efflorescence, protects wooden floors and follow-up coatings from damp damage.
Roughens smooth cement surface effectively, improves bonding force of floor tile adhesive, self-leveling mortar and waterproof coating, avoids hollowing and peeling.
This professional floor substrate treatment material targets common construction defects: cement floor sanding, powdering, dust buildup, moisture ingress and alkali blooming, all of which can ruin subsequent tiling, wood floor installation, self-leveling and waterproofing. Formulated for tropical high-temperature construction conditions widely seen across West Africa. It cures steadily without premature skinning, making it a necessary base primer for new residential builds, commercial premises and renovation jobs.
| Item | Specification |
|---|---|
| Product Name | Floor Primer / Ground Hardener |
| Appearance | Light milky liquid, single component |
| Base | Water-based polymer |
| Penetration depth | 3 ~ 5 mm |
| Application Method | Roller, brush, airless spray |
| Application Substrate | Cement floor, mortar screed |
| Manufacturer | Guangzhou Jiabaili Waterproof Engineering Co., Ltd. |
Contact us to download complete TDS & MSDS documents for tender and customs clearance.
- Loose cement floor reinforcement before tiling or self-leveling mortar pouring
- Substrate dust control for new concrete screed in houses, apartments
- Ground pretreatment before installing wood flooring and vinyl floor sheets
- Basement floor anti-dust, moisture and alkali resistance treatment
- Old building renovation, worn mortar floor consolidation
- Pre-treatment before applying floor waterproof coatings
Many flooring failures happen not because of bad tile adhesive or waterproof coating, but weak, powdery cement ground. If you apply materials directly onto sanding floors, the whole finish layer can delaminate together with loose mortar. Our floor primer penetrates deep into screed and locks sand grains. It works as the critical ground preparation step in our full waterproof & flooring system, cutting callback risks for contractors in Ghana, Nigeria and other West African markets.
✅ We are a professional waterproof manufacturer based in Guangzhou, with on-site construction experience in ground substrate stabilization. Our technical team has solved many floor sanding and alkali return issues for overseas contractors. We specially tune our floor primer formula to maintain penetration even under hot tropical climates, avoiding rapid surface film formation that blocks deep penetration.
- Factory direct supply, stable bulk shipment and competitive pricing for container orders
- Field-tested formula adapted for West Africa high-temperature construction environments
- Complete document package: MSDS, TDS and third-party test reports for import & tender
- Professional construction guidance and technical support for contractors
- Sample kits available, customers can test performance locally before bulk order
We serve distributors and building contractors all across West Africa. We understand local site challenges and deliver waterproof system accessories that match your on-site workflow.
- Surface preparation: Sweep away loose dust, debris and oil. Remove large crumbling mortar chunks.
- Make the substrate slightly damp; standing water on floor surface must be removed completely.
- Stir the liquid well before use. Apply directly, do not over-dilute with extra water.
- Roll evenly over floor. For heavily sanding screeds, apply two coats with proper interval.
- Let it fully cure until floor becomes hard and no sand comes off when rubbed.
- Once cured, proceed with self-leveling, tile adhesive or floor waterproof coating.
We can send construction tutorial videos upon your request.
Q: Can floor primer fix big cracks on concrete floor?
A: Floor primer is for consolidating powdery, sanding substrate, it is not crack filler. Wide cracks should be repaired separately before applying floor primer.
Q: What is the difference between floor primer and wall sand consolidating primer?
A: Floor primer has stronger anti-abrasion and anti-alkali performance, formulated for ground which bears walking load. Sand consolidating primer is optimized for vertical wall substrates. Do not mix them up.
Q: Are samples available for local testing?
A: Yes, sample kits are available. Contact us to check sample cost and freight quotation.
Q: What is coverage rate?
A: Roughly 7–11 sq.m per kg for one coat. Actual consumption changes based on porosity and sanding level of cement screed. Our sales team can calculate total quantity after you provide construction area.
We can provide full documentation set for import clearance and project tender:
- Material Safety Data Sheet (MSDS)
- TDS Technical Data Sheet
- Third-party performance test reports
These files help you complete customs inspection and bidding documentation. Send inquiry to get downloadable PDF links.
Send Inquiry For Your Waterproof Project Now
Tell us your project area, substrate condition and target quantity, destination port.
We will send quotation, consumption calculation and full technical support. Samples available for local testing.
Supplier: Guangzhou Jiabaili Waterproof Engineering Co., Ltd.
Factory Address: Liangtian Jinpen Industrial Zone, Zhongluotan Town, Baiyun District, Guangzhou, China
Message us now to get quotation and technical support.
CABERRY Floor Surface Treatment Agent
I. Product Introduction
II. Core Selling Points
-
Super Penetration & Sand Fixation: It can deeply penetrate into the interior of the floor base, solidify floating ash and loose sand particles, seal the pores of the base layer, and fundamentally solve the problems of floor sanding, powder falling and dust running, which is the core demand of users who search for floor dust sealing agent and floor sanding fix agent.
-
Improve Interface Adhesion: Effectively enhance the bonding force between subsequent floor finishing materials such as tiles, wood flooring, self-leveling, floor paint and the base layer, avoid empty drum, falling off and warping problems in the later stage, which is the key advantage of bonding primer for floors that users pay close attention to.
-
Super Concentrated & Dilutable: Super concentrated formula, can add up to 50% clean water for dilution construction, dilution does not affect the product performance, greatly reduce the construction cost, this concentrated floor primer is very popular among engineering contractors.
-
Moisture-proof, Mold-proof & Alkali-resistant: It has excellent moisture-proof and alkali-resistant performance, can inhibit the growth of mold in the base layer, block the upward return of underground moisture, prevent floor alkali return and mold, meeting the demand of mold resistant floor primer, alkali resistant floor primer and moisture barrier floor primer for family users.
-
Convenient Construction & Easy Inspection: Colored formula, after brushing, you can clearly identify the brushing area, avoid missing brushing and repeated brushing, the construction is more efficient, this easy to apply floor primer is very popular among DIY users.
-
Environmental Protection & Safety: Water-based environmental protection formula, no odor, low VOC, after construction will not pollute the living environment, safe and healthy, which is exactly what users look for when searching for non toxic floor primer and water based floor primer.
III. Application Scenarios
-
Floor base treatment for new house decoration, interface reinforcement of concrete and cement mortar floors, this product is the top choice for interior floor primer projects.
-
Floor base reinforcement for old house renovation, solve the problem of sanding, powder falling and dust running of old floors, perfectly meeting the needs of floor primer for renovation users.
-
Base interface treatment before tile laying, wood flooring installation, self-leveling construction, floor paint brushing, improve the bonding force, which is ideal for floor primer for tile, floor primer for hardwood flooring, floor primer for self leveling and floor primer for epoxy applications.
-
Roughening treatment for smooth floors (such as cast-in-place concrete floors, old tile floors), enhance the adhesion of subsequent finishes, which is also suitable for concrete floor primer projects.
-
Base reinforcement for floor heating floors, seal the pores of the base layer, prevent dust running from the floor heating backfill layer, improve the adhesion of subsequent finishes, meeting the demand of special floor users.
IV. Technical Parameters
|
Item
|
Specification
|
Test Standard
|
|
Appearance
|
Colored uniform emulsion, no caking, no precipitation
|
Visual Inspection
|
|
Solid Content
|
≥45%
|
GB/T 1725
|
|
Surface Drying Time
|
≤4h
|
GB/T 16777
|
|
Dilution Ratio
|
Up to 1:1 water dilution (super concentrated type)
|
Product Standard
|
|
Penetration Depth
|
≥3mm
|
Industry Standard
|
|
Bonding Strength
|
≥1.2MPa
|
GB/T 16777
|
|
Construction Temperature
|
5℃~40℃
|
Industry General Standard
|
|
Theoretical Coverage
|
0.1~0.2kg/㎡ (one coat, after dilution)
|
Engineering Reference
|
|
This set of parameters fully meets the performance requirements of users who are looking for high adhesion floor primer and penetrating floor primer, ensuring reliable performance for various floor treatment needs.
|
V. Construction Method
-
Base Treatment: Ensure that the floor base is solid and flat, remove floating ash, oil stains, loose and peeling parts, repair obvious cracks, construction can be carried out when there is no open water on the base. This preparation step is the key to ensure the effect of floor reinforcement agent application.
-
Dilution: According to the construction needs, dilute the floor primer with clean water, the conventional ratio is 1:0.5 (super concentrated type, up to 1:1 dilution), stir evenly, let it stand for 5 minutes and stir again before use.
-
Brushing Construction: Use a roller or brush to evenly apply the diluted floor primer, can apply 1-2 coats; if you need roughening treatment, you can mix the floor primer with cement into a paste, apply it on the base surface, which is a standard step for floor primer for garage construction.
-
Cross Construction: If applying two coats, wait until the first coat is completely dry (about 2-4 hours), then apply the second coat, and the direction of the second coat is perpendicular to the first coat to ensure uniform coverage.
-
Subsequent Construction: After the floor primer is completely cured (about 24 hours), you can carry out subsequent construction such as tile laying, wood flooring installation, self-leveling construction, floor paint brushing.
VI. Packaging & Storage
-
Packaging Specification: 10kg/barrel, 18kg/barrel sealed plastic barrel, meeting the needs of small household repairs and large engineering projects, which is convenient for users who search for bulk floor primer and small package products.
-
Standard Color: Green (other colors can be customized), easy to check missing brushing.
-
Storage Condition: Store in a cool, dry, ventilated and dark place, avoid sunlight and freezing, storage temperature above 5℃.
-
Shelf Life: 12 months in original sealed package.
-
Transportation: Regarded as non-hazardous goods. Avoid inversion, extrusion and low-temperature freezing during transportation.
Share
