Waterborne Porcelain Floor Coating

Water-Based Ceramic Finish Floor Paint

Caberry Waterborne Porcelain Floor Coating is an eco-friendly, water-based ceramic coating. It forms a smooth, porcelain-like hard finish with good abrasion resistance. It can be applied over cement substrates, existing wall & floor tiles, glass for colour renovation, and metal surfaces for anti-corrosion protection. Suitable for residential renovation, garage, workshop and interior decorative flooring.

• Cement base substrates
• Existing wall and floor ceramic tile resurfacing
• Glass surface recolouring & decoration
• Metal surface anti-rust and anti-corrosion protection

1. Surface preparation: Remove dust, oil and contaminants. Ensure substrate clean, dry and sanded flat.
2. Primer: Apply matching primer by rolling, brushing or spraying for 1–2 coats, fully covering the surface. Wait 2–3 hours until tack-free before topcoat.
3. Topcoat: Add ≤10% clean water and stir thoroughly. Apply 2–3+ coats by roll / brush / spray. Interval ≥4 hours per coat until fully covered; light colours may need one extra coat. Apply top-down, inside-out, touch up corners with brush. Allow 24 hours drying before foot traffic.
4. Clear top seal: After the porcelain coating cures, apply one coat of clear varnish for gloss enhancement and extra protection.

• Form: water-based pigmented liquid coating
• Package: plastic bucket
• Storage: sealed, cool & dry; avoid freezing and high temperature
• Trade Terms: EXW, FOB Guangzhou, CIF, DDP available

Full documents for import clearance and tender:

• ✅ TDS Technical Data Sheet
• ✅ MSDS / SDS Safety Data Sheet
• ✅ Hardness, abrasion, adhesion test report
• ✅ Factory quality certificate

Sample bucket available for colour, hardness, water resistance and adhesion test on cement, tile, glass and metal.

Sample policy: Sample cost and freight borne by buyer.

Q: Can I paint directly over old glossy tiles?
A: Yes, but sanding and primer are mandatory to guarantee adhesion; loose / peeling tiles should be replaced first.

Q: What is the difference between this and regular epoxy floor paint?
A: This is waterborne, lower VOC and suitable for tile resurfacing; traditional epoxy is mostly solvent or two‑component and usually for bare cement floor.

Q: Is it suitable for heavy forklift traffic?
A: It works for light to medium foot and wheel load; for heavy industrial forklift areas, dedicated heavy‑duty epoxy system is recommended.

Q: Can it be used outdoors?
A: It can be used outdoors, but select UV-resistant colour system and top clear coat for better anti-fading performance.

Q: Can you provide English TDS and MSDS?
A: Yes, complete English technical documents ready for customs clearance.