CABERRY
Two-Component Epoxy Resin Coating
Two-Component Epoxy Resin Coating
Impossible de charger la disponibilité du service de retrait
Epoxy Resin Coating
Two-Part Epoxy Coating | Part A Resin + Part B Hardener | Caberry Waterproof
Product Overview
Caberry epoxy resin coating is a two-component coating system consisting of Part A resin and Part B hardener. After mixing, a chemical cross-linking reaction forms a dense, hard protective film for specified industrial coating applications.
Two-component system · High hardness · Chemical resistance · Protective coating film
Key Advantages
Hard protective film after curing.
Designed to resist surface abrasion.
Resistance to specified chemicals.
Continuous protective barrier.
Application Scope
Industrial Floors
Factory workshops, production floors and warehouses.
Chemical Tanks & Sewage Pools
Protective lining applications subject to chemical compatibility.
Concrete Structures
Selected concrete surface protection and sealing projects.
Warehouses & Parking Areas
Protective coating for suitable concrete floor surfaces.
Application Process
Remove dust, oil and loose materials.
Mix Part A and Part B at the specified ratio.
Apply evenly using recommended tools.
Allow sufficient curing before service.
Technical Specifications
| Technical Property | Specification | Test Reference |
|---|---|---|
| Product Type | Two-Component Epoxy Resin Coating | Product specification |
| Components | Part A Resin + Part B Hardener | Product specification |
| Mixing Ratio | Refer to product TDS | By weight or volume |
| Pot Life | 30–40 minutes* | Confirm test temperature |
| Construction Temperature | 10–35°C* | Product application conditions |
| Relative Humidity | ≤75%* | Product application conditions |
| Volume Solids | Refer to product TDS | ISO 3233-1, where applicable |
| Adhesion Strength | Refer to actual test report | ISO 4624 / ASTM D4541, as applicable |
| Abrasion Resistance | Refer to actual test report | ASTM D4060, if applicable |
| Dry Film Thickness | Refer to product TDS | ISO 2808 |
| Full Curing Time | Refer to product TDS | Product-specific test conditions |
*These application values are based on the information previously supplied. Confirm them against the approved product TDS before publication. International standards specify test methods, not universal performance values for all epoxy coating products.
Product Testing & Quality Control
Adhesion Test
Pull-off adhesion evaluation under a specified test method.
Abrasion Test
Evaluation of coating wear resistance under specified conditions.
Important Notes
- Environment: Construction temperature 10–35°C and relative humidity ≤75%, subject to product specifications. Substrate temperature must be at least 3°C above dew point.
- Material pot life: Use mixed material within 30–40 minutes, subject to actual temperature and product TDS.
- Waste disposal: Do not discharge uncured material into drains. Follow local hazardous waste regulations.
- Safety: Work in a well-ventilated area. Wear suitable respiratory protection, safety goggles and protective gloves as specified in the SDS.
- Tool cleaning: Clean equipment immediately after application using the recommended cleaning solvent. Follow the SDS and local safety requirements.
Frequently Asked Questions
Q: What is the pot life of epoxy resin coating?
A: Pot life is the usable working time after Part A and Part B are mixed. The previously supplied reference is 30–40 minutes. Actual working time depends on temperature and batch size.
Q: Can epoxy coating be used outdoors?
A: Standard epoxy coatings may chalk or yellow under prolonged UV exposure. A compatible UV-resistant aliphatic topcoat may be required for exposed outdoor applications.
Q: Can you provide TDS, SDS and test reports?
A: Contact Caberry to request available technical documents and product-specific test reports.
Get Quotation & Technical Support
Contact Caberry for bulk pricing, custom packaging and product information.
