CABERRY
Caberry Super Elastic Flexible Waterproof Coating
Caberry Super Elastic Flexible Waterproof Coating
Impossible de charger la disponibilité du service de retrait
Super-Elastic Flexible Waterproof Coating
High Elongation Flexible Polymer Waterproof Membrane, Crack Bridging & Strong Substrate Adhesion Manufactured by Guangzhou Jiabaili Waterproof Engineering Co., Ltd.
Super stretchable cured film, excellent crack-bridging capability. Accommodates minor substrate movement and thermal cracks common on cement terraces and new concrete slabs.
Firmly adheres to concrete, cement mortar, brickwork. Good bonding even on slightly damp substrates, ideal for bathroom, balcony and terrace waterproofing.
Retains flexibility under temperature fluctuation. Forms seamless continuous membrane without joints, stops water seepage from standing water and rain infiltration.
It is designed for areas where slab shrinkage and thermal expansion often create fine cracks that cause leaks. It can be applied by roller or brush, easy for on-site construction. While not matching silicone’s extreme UV resistance for long-term fully exposed roofs, it delivers superior elasticity for concealed or semi-exposed terraces, wet rooms and balconies. The formula is stabilized to perform reliably under hot tropical climate in West Africa. It is widely used for new construction and renovation leak repair projects.
| Item | Specification |
|---|---|
| Product Name | Super-Elastic Flexible Waterproof Coating |
| Film Character | Highly flexible seamless elastic membrane |
| Elongation at Break | ≥600% |
| Curing Type | Air curing |
| Applicable Substrates | Concrete slab, cement mortar, brick, terrace, balcony |
| Application Tools | Brush, roller, airless sprayer |
| Manufacturer | Guangzhou Jiabaili Waterproof Engineering Co., Ltd. |
Contact us to download complete TDS & MSDS documents for tender and customs clearance.
- Balcony waterproofing for residential apartments
- Cement terrace waterproofing, semi-exposed roof slab treatment
- Bathroom, shower room and wet area waterproofing
- Foundation slab waterproofing where minor concrete shrinkage cracks appear
- Old building renovation for leak repairs on cracked mortar surfaces
- Internal gutter and parapet corner waterproof reinforcement
A common source of building leaks in West Africa is micro-cracks from concrete shrinkage and temperature variation. Rigid waterproof coatings crack together with the slab. This super-elastic coating stretches to bridge fine cracks and keep the waterproof layer intact. It is the preferred option for contractors working on terraces, balconies and wet rooms in Ghana, Nigeria and surrounding tropical markets where slab movement frequently causes recurrent leakage.
✅ We are Guangzhou waterproof manufacturer specialized in high-flexibility waterproof systems. Our super-elastic coating is tuned to maintain high elongation under continuous high temperature, without losing flexibility or turning sticky in tropical climate.
- Factory direct bulk supply, competitive price for full-container orders
- High elongation formula, specifically for substrates prone to shrinkage cracking
- Full document package: MSDS, TDS and third-party performance reports for import & tender
- Professional technical support for contractors, reinforcement detailing guidance
- Samples available for local field testing before committing to large shipment
We supply waterproof materials to distributors and building contractors all over West Africa. This super-elastic coating complements our silicone roof coating and other waterproof products to build a complete waterproof solution package for your construction projects.
- Surface prep: Substrate must be solid and clean. Sweep away loose mortar, dust, oil, debris.
- Repair large cracks and holes first. Use polyester reinforcement fabric over active crack zones.
- Stir coating thoroughly before use. Apply with roller or brush.
- Apply minimum two coats. Apply second coat perpendicular to the first coat after proper drying time.
- Do not apply if rain is expected before curing. Protect fresh membrane from heavy rain.
- After fully cured, carry out water ponding test to verify waterproof performance.
Construction tutorial videos and detail sketches can be sent upon request.
Q: What is the difference between super-elastic coating and silicone roof coating?
A: Super-elastic coating achieves much higher elongation, great for slabs with micro-shrinkage cracks. But it is not designed for permanent fully exposed roof under direct tropical UV. Silicone coating has superior UV resistance for open-air roof surfaces.
Q: Can this coating be used on metal roof sheets?
A: It can be applied on metal, but metal surfaces need proper rust removal and primer treatment first. For long-term exposed metal roof, silicone roof coating is usually recommended.
Q: Can I use it for completely exposed terrace without any top protective layer?
A: It works for semi-exposed terraces. Continuous long-term strong UV will gradually reduce elasticity. If fully exposed all year round, silicone coating is a better choice.
Q: What is coverage rate?
A: Approximately 0.7–1.0 kg per sqm for two coats. Consumption varies with substrate roughness and porosity. Our sales team can calculate total quantity after you provide project area.
We can provide full documentation set for import clearance and project tender:
- Material Safety Data Sheet (MSDS)
- TDS Technical Data Sheet
- Third-party performance test reports
These files support customs inspection and tender submission. Send your inquiry to get downloadable PDF links.
Send Inquiry For Your Flexible Waterproof Project Now
Tell us your project area, substrate condition and target quantity, destination port.
We will prepare quotation, material consumption calculation and full technical support. Samples available for local field testing.
Supplier: Guangzhou Jiabaili Waterproof Engineering Co., Ltd.
Factory Address: Liangtian Jinpen Industrial Zone, Zhongluotan Town, Baiyun District, Guangzhou, China
Message us now to get quotation and technical support.
Product Introduction
I.Core Functions
-
Ultra-high Elasticity & Crack Resistance: It has excellent flexibility and ultra-high elasticity, which can effectively resist the deformation of the base caused by settlement and temperature changes, can cover wider micro-cracks, avoid the failure of the waterproof layer due to base changes, and is suitable for base parts that are prone to deformation.
-
Excellent Water & Weather Resistance: It has excellent water resistance, can be used in immersed environment for a long time, and has excellent weather resistance, which can adapt to a variety of complex indoor and outdoor environments, the waterproof layer is aging-resistant and durable.
-
Available for Construction on Wet Base: It can be directly constructed on wet base without waiting for the base to be completely dry, and the bonding is firm, which effectively shortens the construction period, and it will not flow when constructed on vertical surfaces.
-
Dual Waterproof Effect: It can not only form a continuous and dense waterproof membrane on the base surface, but also the active ingredients can penetrate into the base to form crystals, dual water blocking, the waterproof effect is consistent on both positive and negative water surfaces.
-
Convenient & Efficient Construction: After the slurry is dried, there is no need to build an additional mortar protection layer, and follow-up operations such as tile pasting and plastering can be carried out directly. It is water-based and environmentally friendly, non-toxic, harmless and pollution-free, and the construction operation is simple.
II.Application Scenarios
III.Technical Parameters
|
Parameter Item
|
Index Requirement
|
|
Execution Standard
|
GB/T 23445-2009
|
|
Appearance
|
The liquid component is milky white emulsion, the powder component is gray powder, and the mixture is uniform paste.
|
|
Solid Content
|
≥75%
|
|
Surface Drying Time
|
≤5h
|
|
Tensile Strength (untreated)
|
≥1.8MPa
|
|
Elongation at Break
|
≥300%
|
|
Bonding Strength
|
≥1.8MPa
|
|
Water Impermeability
|
0.3MPa, no leakage for 30min
|
|
Alkali Resistance
|
No abnormality after 96h test
|
|
Reference Consumption
|
For waterproof construction (2 coats, total thickness 1.2mm): approx. 1.5-2.0kg/㎡;
For moisture proofing construction (thickness 0.6mm): approx. 0.6-1.0kg/㎡
|
|
Applicable Construction Temperature
|
5℃-40℃
|
IV.Construction Method
-
Base Treatment: The base surface shall be firm, flat, clean, free of looseness, sanding, oil stains and open water. Obvious pores and sand holes can be smoothed with leakage stopping agent or cement mortar, and the parts such as internal and external corners and pipe roots shall be treated as rounded corners. If the base is dry, sprinkle water to wet it in advance until there is no open water.
-
Material Mixing: According to the ratio of liquid component : powder component = 1:2, pour the liquid component into the mixing container first, then slowly add the powder component, stir fully with an electric mixer for 3-5 minutes until uniform paste without particles and sediment is formed. Manual mixing is prohibited to ensure uniform mixing.
-
Node Reinforcement: For special node parts such as internal and external corners, pipe roots, construction joints and junctions of different materials, carry out additional layer reinforcement treatment first, apply the slurry thickly on the node parts with a brush for sealing and leakage stopping.
-
Layered Coating: Brush the slurry evenly with a brush or roller, do not miss any area. Generally, 2 coats are required, and the thickness of each coat shall not exceed 1mm. The coating directions of the two coats shall be vertical and cross. The interval time shall be subject to the coating drying and non-sticky to hands, usually 1-2 hours. If the interval exceeds 24 hours and the coating is cured, wet the base fully with clean water first before the next coat.
-
Curing & Acceptance: After the construction is completed, before the coating is completely dried, trampling, rain erosion, exposure to the sun and sharp damage are prohibited. After curing for 24 hours at normal temperature, the water closed test can be carried out to accept the waterproof effect.
V.Packaging & Storage
-
Packaging Specification: Three specifications are available: 5kg/barrel, 10kg/barrel and 20kg/barrel, with matched two-component packaging.
-
Storage Conditions: The liquid component shall be stored in a cool and dry place above 5℃, avoid sunlight and freezing. The powder component shall be stored in a dry and ventilated place to prevent moisture.
-
Shelf Life: For unopened products, the shelf life is 12 months under the above compliant storage conditions.
Contact Us
Company Overview
Guangzhou Jiabaili Waterproof Engineering Co., Ltd.
Founded 2017-11-28; registered capital RMB 5M. Annual turnover RMB 10-50M. Sales network: 500+ dealers; domestic and export markets.
Core Products & Applications:Various types of waterproof coatings for roads and bridges, and waterproof coatings for home decoration: interface agents, heat insulation coatings, wall and floor primers, anti-rust primers, K11, JS, latex paints, polyurethane etc.Used for bridges, subway tunnels, roofs, basements, water tanks, sewage plants, residential kitchens/bathrooms.
Advantages:
Tech & Certification: 12 core patents; provincial Sci-Tech Progress Award; certified by National Building Materials Testing Center and CRCC; core products operable to -25°C.
Capacity & Supply: 6 automated lines; annual capacity 120,000 t (+50,000 t high-performance); 30 provincial logistics nodes; 48-hour emergency supply; 99.2% on-time delivery.
Quality & Service: Six-stage QC; <0.3% repair rate (3 yrs); 10-year warranty; 20-person technical team; 85% repurchase rate.
Channel Support: Regional distributor protection; export capability; franchise support (store subsidies, materials, training, marketing, rebates).
Customization & MOQ: Minimum 1 ton; adjustable performance (weather/low-temp resistance, tensile, solid content); packaging 5/20/25/50 kg or custom; tailored formulas for bridges, roofs, basements, tunnels, residential.
Process: 1.request 2.R&D 3.sample 4.production 5.QC 6. delivery.
Factory & Process: Standardized automated manufacture; R&D lab and QC center;
1. raw material inspection
2. precise batching
3. polymer modification/emulsification
4. filtration/homogenization
5. batch testing
6. automated filling/labeling
7. warehousing & distribution.
Environmental controls meet national standards.
Logistics & Packaging: Standard packs 5/20/25/50 kg; custom branding; nationwide FTL/LTL/express (3-5 working days; 48-hour emergency); export packaging, customs, sea/air freight; leak-proof/moisture-proof packing, tracking damage replacement.
