Epoxy Colored Sand Tile Grout (Cartridge Type)

Two‑Component A+B Cartridge Epoxy Grout, 400ml for Tile Joints

Caberry cartridge‑packaged epoxy colored sand is a ready‑to‑use two‑component tile grout, compatible with standard caulking guns. It works universally on walls and floors, featuring freeze‑thaw resistance, high temperature tolerance, non‑shrinking and non‑sagging performance. Fully cured surface is hard like porcelain, permanently mould‑proof, waterproof, anti‑corrosion, acid‑alkali resistant, ageing resistant and oil‑repellent.

• Volume: 400ml per cartridge set (A+B)
• Universal for walls and floors
• Freeze resistant & high temperature resistant
• No shrinkage, no sagging / collapse
• Acid & alkali resistant, anti‑ageing, oil resistant
• Hard as porcelain, permanent mould‑proof, waterproof and anti‑corrosion

1. Clean tile joints, groove out the gap until tile edges are exposed on both sides.
2. Thoroughly remove dust inside gaps with vacuum cleaner or broom.
3. Open the cartridge, load into caulking gun, extrude along tile gaps.
4. Beginners may apply 20–50 cm section at a time; longer runs after gaining experience.
5. Compact and smooth the grout.
6. Wait at least 6 hours (depends on ambient temperature), then scrape off excess residue on tile surface.

• Package: Dual cartridge 400ml A+B set, standard caulking gun compatible.
• Storage: Keep sealed in cool, dry area, avoid direct sunlight and extreme temperature.
• Trade Terms: EXW, FOB Guangzhou, CIF, DDP available.

Full documents for import clearance and tender:

• ✅ TDS Technical Data Sheet
• ✅ MSDS / SDS Safety Data Sheet
• ✅ Water, mould & chemical resistance test report
• ✅ Factory quality certificate

Sample cartridge set can be arranged for colour test and construction trial.

Sample policy: Sample cost and freight borne by buyer.

Q: What is the difference between cartridge type and bucket epoxy colored sand?
A: Cartridge type is pre‑packaged A+B, directly used with caulking gun, simpler for small‑scale construction and retail; bucket version requires manual mixing, usually for large projects.

Q: Is it suitable for wet areas such as bathrooms and kitchens?
A: Yes, permanent waterproof, mould‑proof and oil‑resistant, perfect for wet rooms.

Q: How long should I wait before cleaning excess grout?
A: Minimum 6 hours; adjust according to local temperature and humidity.

Q: Can you supply many colour options?
A: Multiple standard colours in stock, custom colours available for bulk orders.

Q: Can you provide English TDS and MSDS?
A: Yes, complete English technical documents ready for customs clearance.