Water-Based Penetrating Inorganic Waterproof Agent

Single Component Liquid, Blue Drum Pack

Caberry water-based penetrating inorganic waterproof agent is an inorganic penetrating silicate waterproofing material. It penetrates deep into cementitious substrates and triggers crystallization reactions to form interlaced network crystal structures inside concrete, blocking capillary channels permanently. It improves substrate compactness and delivers excellent hydrophobic performance. Widely used for concrete structures, basement, tunnel, reservoir and water conservancy projects.

• Excellent penetration and hydrophobic performance.
• Penetrates deep into cement matrix and forms interlocking network crystals via chemical crystallization.
• Blocks water migration and prevents water exudation through concrete capillaries.
• Stops water seepage and water streaming on concrete surfaces.
• Increases surface density and compressive strength of mortar and concrete.

1. Substrate cleaning: Ensure substrate is dry, clean, free of standing water, grease and contaminants before application.
2. Application: Spray or brush evenly. For floors, apply continuously from one side to the other. For vertical walls, work from bottom upward for uniform coverage.
3. Curing & protection: Keep away from rainwater within 24 hours after application. No foot traffic before fully dry. Stop construction when temperature drops below 4°C. Dry substrate is mandatory.

• Form: Single-component clear / pale liquid
• Package: Blue HDPE plastic drum
• Storage: Sealed, cool and shaded warehouse; prevent frost and direct sunlight
• Trade Terms: EXW, FOB Guangzhou, CIF, DDP available

Full documents for import clearance and tender:

• ✅ TDS Technical Data Sheet
• ✅ MSDS / SDS Safety Data Sheet
• ✅ Penetration depth, impermeability, compressive strength test report
• ✅ Factory quality certificate

Sample policy: Sample cost and freight borne by buyer.

Q: Can it be used on wet concrete?
A: The construction requirement is dry substrate; standing water must be removed before application.

Q: Is this the same as cementitious capillary crystalline waterproofing coating?
A: Similar crystallization principle, while this product is liquid penetrating type, easier for large-area spray construction.

Q: Can it be used as top protection over other waterproof membranes?
A: It is designed mainly for cement/concrete itself; not recommended as direct finish layer over asphalt or polymer membranes.

Q: What is the lowest applicable temperature?
A: Stop construction once temperature ≤ 4°C.

Q: Can you provide English TDS and MSDS?
A: Yes, complete English technical documents ready for overseas tender and customs clearance.