CABERRY
single component JS polymer cement waterproof coating
single component JS polymer cement waterproof coating
No se pudo cargar la disponibilidad de retiro
JS Polymer Cementitious Waterproof Coating
Single Component Pure Latex JS Waterproof Coating | Caberry Waterproof
Product Overview
This single-component pure latex JS polymer cementitious waterproof coating is a flexible polymer emulsion. It is mixed with cement at a ratio of 1:1 on site. After curing, it forms a tough, elastic, water-resistant membrane with excellent adhesion to cement substrates. Suitable for both indoor and outdoor civil & infrastructure waterproofing projects.
Key Advantages
✅ Flexible Polymer Membrane
Good elongation, can adapt to minor substrate deformation and fine cracks.
✅ On-Site Mixable
Pure latex, mixed with ordinary cement at 1:1 ratio, flexible material allocation.
✅ Strong Adhesion
Firmly bond with concrete, brick, blocks and precast cement structures.
✅ Eco-Friendly & Safe
Non-toxic formula, applicable for swimming pools, water tanks and sewage pools.
Application Scope
- Concrete, brick wall, concrete block and precast structure waterproofing
- Bathroom, kitchen, shower room, balcony indoor waterproof works
- Swimming pool, water tank, domestic sewage pool anti-seepage
- Basement, elevator shaft, subway station, mine and tunnel waterproofing
- Indoor and outdoor waterproof projects for infrastructure & civil buildings
Construction Guide
- Clean the base surface thoroughly, keep it flat and free of contaminants. Dampen the substrate properly, no standing water allowed.
- Mix JS pure latex and cement at 1:1 ratio, stir uniformly. Keep intermittent stirring during application to prevent sedimentation.
- Construct in separate layers. The second coat shall be brushed perpendicular to the first coat.
- Each single layer thickness ≤ 1 mm. Build total thickness according to project waterproof grade requirements.
FAQ
Q: What is the difference between single-component pure latex JS and two-component JS?
A: This single-component pure latex needs to be mixed with cement on site, more flexible for bulk engineering use; two-component JS comes with pre-matched powder & liquid for direct mixing.
Q: Can this JS coating be used for swimming pools?
A: Yes, after correct mixing, layered construction and full curing, it is suitable for swimming pools and water storage structures.
Q: Can you supply TDS, MSDS and test certificates?
A: Sure, we provide complete technical documents for customs clearance, tender and site inspection.
Get Quotation & Technical Support
If you need bulk price, custom packaging or construction technical guidance, please contact us directly.