FYT-1 Bridge Deck Waterproof Coating

Black, 50kg Drum Pack

Caberry FYT‑1 bridge deck waterproof coating is a classic polymer modified asphalt waterproofing material widely used for highway and municipal bridge deck systems. It features stable bonding with concrete substrate and hot asphalt overlay, controlled film thickness and standardized dosage, suitable for large-scale bridge construction and bidding projects.

• Standard application: 3 coats system
• Typical consumption: 1.5 kg / m²
• Dry film thickness: 0.5 mm – 0.7 mm
• Application method: spray machine, brush or roller

1. Prepare tools: mixing bucket, spray equipment or dedicated brushes / rollers.
2. Substrate requirement: bridge slab & beam concrete must reach designed strength; no loose mortar, peeling, hollowing or severe cracks. Flatness and drainage outlets shall comply with bridge codes, drainage pipes fixed firmly.
3. Waterproof base must be clean, dry and free of ponding.
4. Surface treatment: remove dust, floating ash, impurities and oil stains by air compressor, clean water or degreaser; grind off hardened concrete / mortar bumps.
5. Three‑coat construction procedure:
   • A. Stir the coating thoroughly before use.
   • B. Pre-treat leak points and internal corners: two reinforcing coats first, then three coats for detail areas, followed by full surface first coat.
   • C. Apply second coat only after the first coat is fully cured.
   • D. Apply the third coat after the second coat dries.

• Form: black liquid FYT‑1 polymer modified asphalt coating
• Package: 50 kg blue plastic drum
• Storage: sealed, cool shaded warehouse, avoid freezing and direct sun
• Trade Terms: EXW, FOB Guangzhou, CIF, DDP available

Full documents for import clearance and tender:

• ✅ TDS Technical Data Sheet
• ✅ MSDS / SDS Safety Data Sheet
• ✅ Impermeability, bonding, high-low temperature flexibility test report
• ✅ Factory quality certificate

Sample policy: Sample cost and freight borne by buyer.

Q: What is the difference between FYT‑1 and AMP‑100?
A: Both are bridge deck modified asphalt coatings; FYT‑1 is the traditional standard grade with widely recognised tender specifications, while AMP‑100 has upgraded polymer modification for better low‑temperature performance.

Q: Is 1.5 kg/m² total dosage?
A: Yes, this is the standard three‑coat reference consumption; adjust according to substrate roughness and project specification.

Q: Can it be sprayed?
A: Yes, mechanical spray is preferred for large bridge decks to ensure uniform film thickness.

Q: Can you supply test reports for highway bidding?
A: Yes, we provide complete inspection documents for municipal and highway tender submission.

Q: Can you provide English TDS and MSDS?
A: Yes, complete English technical documents ready for customs clearance.