CABERRY Wall Fixing for wall and concrete

CABERRY Wall Fixing

I. Product Introduction

II. Core Selling Points

1. Super Penetration & Consolidation: It can deeply penetrate into the interior of the wall base, solidify floating ash and loose particles, seal the pores of the base layer, and fundamentally solve the problems of wall sanding and powder falling, which is the core demand of users who search for wall dust sealing agent and wall sanding fix agent.
2. Improve Interface Adhesion: Effectively enhance the bonding force between subsequent finishing materials such as putty, paint, wallpaper and the base layer, avoid empty drum, falling off and cracking problems in the later stage, which is the key advantage of bonding primer for walls that users pay close attention to.

3. Super Concentrated & Dilutable: Super concentrated formula, can add up to 50% clean water for dilution construction, dilution does not affect the product performance, greatly reduce the construction cost, this concentrated wall primer is very popular among engineering contractors.
4. Moisture-proof, Mold-proof & Crack-resistant: It has certain moisture-proof performance, can inhibit the growth of mold in the base layer, and reduce the probability of wall cracking in the later stage, improve the service life of the wall, meeting the demand of mold resistant wall primer and wall crack prevention primer for family users.
5. Convenient Construction & Easy Inspection: Colored formula, after brushing, you can clearly identify the brushing area, avoid missing brushing and repeated brushing, the construction is more efficient, this easy to apply wall primer is very popular among DIY users.
6. Environmental Protection & Safety: Water-based environmental protection formula, no odor, low VOC, after construction will not pollute the living environment, safe and healthy, which is exactly what users look for when searching for non toxic wall primer and water based wall primer.

III. Application Scenarios

• Wall base treatment for new house decoration, interface reinforcement of concrete and cement mortar walls, this product is the top choice for interior wall primer projects.
• Wall base reinforcement for old house renovation, solve the problem of sanding and powder falling of old walls, perfectly meeting the needs of wall primer for renovation users.
• Base interface treatment before putty, latex paint, wallpaper, wall cloth construction, improve the bonding force, which is ideal for wall primer for paint, wall primer for wallpaper and wall primer for plaster applications.
• Roughening treatment for smooth walls (such as cast-in-place concrete walls, old tile walls), enhance the adhesion of subsequent finishes, which is also suitable for concrete wall primer projects.
• Base reinforcement for special walls such as light block walls and thermal insulation walls, improve the base strength, meeting the demand of drywall primer for special wall users.

IV. Technical Parameters

1. Base Treatment: Ensure that the wall base is solid and flat, remove floating ash, oil stains, loose and peeling parts, repair obvious cracks, construction can be carried out when there is no open water on the base. This preparation step is the key to ensure the effect of wall reinforcement agent application.
2. Dilution: According to the construction needs, dilute the wall primer with clean water, the conventional ratio is 1:0.5 (super concentrated type, up to 1:1 dilution), stir evenly, let it stand for 5 minutes and stir again before use.
3. Brushing Construction: Use a roller or brush to evenly apply the diluted wall primer, can apply 1-2 coats; if you need roughening treatment, you can mix the wall primer with cement into a paste, apply it on the base surface, which is a standard step for exterior wall primer construction.
4. Cross Construction: If applying two coats, wait until the first coat is completely dry (about 2-4 hours), then apply the second coat, and the direction of the second coat is perpendicular to the first coat to ensure uniform coverage.
5. Subsequent Construction: After the wall primer is completely cured (about 24 hours), you can carry out subsequent construction such as putty scraping, latex paint brushing, wallpaper pasting, which is the standard process for users who search for wall primer for multi-surface.

V. Packaging & Storage

• Packaging Specification: 10kg/barrel, 18kg/barrel sealed plastic barrel, meeting the needs of small household repairs and large engineering projects, which is convenient for users who search for bulk wall primer and small package products.
• Standard Color: Yellow (other colors can be customized), easy to check missing brushing.
• Storage Condition: Store in a cool, dry, ventilated and dark place, avoid sunlight and freezing, storage temperature above 5℃.
• Shelf Life: 12 months in original sealed package.
• Transportation: Regarded as non-hazardous goods. Avoid inversion, extrusion and low-temperature freezing during transportation.