CABERRY
100% Silicone Roof Coating Manufacturer | CABERRY
100% Silicone Roof Coating Manufacturer | CABERRY
Δεν ήταν δυνατή η φόρτωση της διαθεσιμότητας παραλαβής
100% Silicone Waterproof Coating for Roofs
Pure Silicone Roof Coating | Flexible, UV Resistant & Weatherproof Roofing Membrane
CABERRY 100% Silicone Waterproof Coating is a single-component, liquid-applied silicone roofing solution developed for roof waterproofing, roof restoration and long-term exterior protection. It cures to form a seamless, flexible waterproof membrane designed to withstand UV radiation, rainfall, temperature changes and outdoor weathering.
This 100% silicone roof coating is designed for suitable concrete roofs, metal roofing systems and compatible existing roofing substrates. It provides a practical coating solution for commercial buildings, industrial facilities, warehouses and residential roofing projects.
Roofing Applications & Suitable Substrates
Silicone roof coating is commonly selected for roof waterproofing maintenance, protective coating applications and restoration of compatible existing roofing systems. Substrate condition and compatibility should always be assessed before application.
Concrete Flat Roof
Suitable for properly prepared concrete and cement-based roofing substrates. Used for roof waterproofing protection and refurbishment.
Search topic: Silicone Coating for Concrete Roof
Metal Roof & Corrugated Steel Roof
Designed for compatible metal roofing surfaces after appropriate cleaning, rust treatment and adhesion preparation.
Search topic: Silicone Roof Coating for Metal Roof
Modified Bitumen Roof
Can be considered for compatible modified bitumen roofing systems following surface inspection and adhesion testing.
Search topic: Silicone Coating for Modified Bitumen Roof
Commercial & Industrial Roofing
Suitable for specified commercial buildings, industrial facilities, warehouses and other compatible roof structures.
Search topic: Commercial Silicone Roof Coating
Key Features of 100% Pure Silicone Roof Coating
100% Pure Silicone Formulation
Silicone-based coating designed for long-term outdoor exposure and resistance to weathering.
Seamless Waterproof Membrane
Liquid application creates a continuous coating layer without conventional sheet membrane lap joints.
Excellent UV Resistance
Designed to maintain coating performance under prolonged sunlight and outdoor exposure.
High Flexibility
Flexible cured film helps accommodate minor substrate movement within the coating system's tested limits.
Weather Resistance
Provides protection against rainfall and outdoor weathering when correctly applied and fully cured.
Water Vapor Permeability
Silicone coating systems can allow water vapor transmission. Actual permeability depends on the formulation and film thickness.
Wide Temperature Performance
Designed for outdoor temperature fluctuations. Refer to verified product testing for the applicable service temperature range.
Custom Color Options
White, light grey and selected custom colors can be discussed for project and OEM requirements.
Technical Data Sheet - Silicone Waterproof Coating
The following technical specifications describe the current product information supplied for CABERRY 100% Silicone Waterproof Coating. Please refer to the latest official TDS and laboratory reports for confirmed project specifications.
| Technical Parameter | Specification |
|---|---|
| Product Name | 100% Silicone Waterproof Coating |
| Base Material | 100% Silicone, Single Component |
| Solid Content | ≥ 92% |
| Appearance | Smooth paste / liquid, customizable color |
| Theoretical Coverage | 0.8–1.2 kg/m² (original supplied figure; confirm film thickness and coat configuration) |
| Tack-Free Time | 2–4 hours at 25°C, 50% RH |
| Full Curing Time | 24–48 hours, depending on film thickness and environmental conditions |
| Tensile Strength | ≥ 1.2 MPa |
| Elongation at Break | ≥ 450% |
| Service Temperature Range | -40°C to +180°C (confirm test definition and applicability) |
| Shelf Life | 12 months in original sealed packaging |
| Standard Packaging | 20 kg / pail |
Silicone Roof Coating System & Substrate Compatibility
Selecting the correct primer and preparation method is important for the adhesion and durability of a silicone roof waterproofing system. Different roofing substrates require different surface treatments.
| Roof Substrate | Surface Preparation | Primer Consideration |
|---|---|---|
| Concrete Roof | Remove dust, laitance, loose materials and contaminants. Ensure sufficient surface strength. | Use a compatible penetrating primer where required by the system. |
| Metal Roof | Remove rust, grease, dirt and unstable coatings. Repair defective areas. | Use a compatible metal primer when specified by the coating system. |
| Modified Bitumen | Inspect for blistering, loose granules, cracks and surface contamination. | Confirm compatibility and adhesion through testing before full application. |
| Existing Silicone Coating | Clean the surface and remove loose or deteriorated material. | Check compatibility with the existing silicone coating and follow the manufacturer's recoating instructions. |
| TPO / EPDM Roofing | Clean and inspect the existing membrane. Check its condition and surface characteristics. | Use only an approved preparation and primer system confirmed for the specific membrane. |
Silicone Roof Waterproofing Application Method
A properly prepared substrate and controlled coating thickness are essential for a reliable silicone roof coating system.
Surface Inspection & Preparation
Inspect the roof surface. Remove dust, dirt, oil, loose coating, rust and other contaminants. Repair defective substrate areas.
Primer Application
Apply the compatible primer when required by the substrate and approved coating system. Allow it to dry as instructed.
First Silicone Coating Layer
Apply the first layer evenly using a suitable roller, brush or approved spraying equipment.
Reinforcement of Critical Areas
Install compatible polyester reinforcing fabric at specified seams, joints, cracks, flashing and other high-risk details when required.
Second Silicone Coating Layer
Apply the subsequent coating layer after the previous layer reaches the required application condition.
Final Inspection & Curing
Inspect the coating for uniformity, missed areas and defects. Protect the applied coating until sufficiently cured.
Coverage Rate, Film Thickness & Construction Conditions
Recommended Coverage and Film Thickness
The required silicone coating consumption depends on the target dry film thickness, substrate profile, application method and number of coating layers.
| Construction Item | Product Information |
|---|---|
| Supplied Theoretical Consumption | 0.8–1.2 kg/m² |
| Reference Dry Film Thickness | 0.8 mm as stated in the original product specification; verify actual product yield and test basis. |
| Application Layers | Multiple layers according to the approved project specification. |
| Application Tools | Brush, roller or suitable airless spraying equipment. |
Construction Conditions
- Recommended construction temperature in the supplied product information: 5°C–40°C.
- Avoid application during rainfall, heavy fog or when condensation is present.
- The substrate must be stable, clean and free from standing water.
- Follow the product-specific moisture and surface temperature requirements.
- Allow sufficient curing time before exposure to rain or other weather conditions.
- Use suitable gloves and protective goggles during application.
Silicone Roof Coating - Finished Roofing Applications
A completed silicone roof coating project should provide a continuous, uniform coating layer over the approved roofing substrate. Proper surface preparation, coating application and inspection are important for the performance of the waterproofing system.
Packaging, Wholesale Supply & OEM Manufacturing
CABERRY provides silicone waterproof coating supply solutions for overseas distributors, building material importers, roofing contractors and construction project purchasers.
| Standard Packaging | 20 kg / pail |
| Custom Packaging | Available upon order confirmation |
| Private Label / OEM | Available subject to order requirements |
| Color Options | White, light grey and selected custom colors |
| MOQ | Standard MOQ: 1,000 kg; trial orders subject to negotiation |
| Production Lead Time | Normally 7–15 working days after deposit confirmation, subject to order quantity and production schedule |
| Trade Terms | EXW / FOB Guangzhou / CIF / DDP, subject to destination and logistics feasibility |
Color Matching & Sample Service
Standard color options include white and light grey. Selected RAL color matching can be discussed for customized projects. Sample packaging options of 1 kg or 5 kg can be arranged, subject to availability. Sample costs and shipping arrangements will be confirmed before dispatch.
Technical Documents & Quality Assurance
Technical documentation can be provided to support product evaluation, procurement, project approval and applicable import requirements, subject to product availability and destination-market regulations.
Frequently Asked Questions About Silicone Roof Coating
1. What is 100% silicone roof coating used for?
100% silicone roof coating is a liquid-applied roofing material used for waterproofing protection and restoration of compatible roofing substrates, including selected concrete, metal and existing roofing systems.
2. Can silicone roof coating be applied to a metal roof?
Yes, it can be considered for compatible metal roofing systems. The surface must be cleaned, rust-treated where necessary and properly prepared. A compatible primer may be required depending on the metal substrate and coating system.
3. Can 100% silicone coating be used on concrete roofs?
Yes, suitable concrete roofs can be considered for application. The concrete should be sound, clean and properly prepared. Primer requirements should be determined by the substrate condition and manufacturer's instructions.
4. Does silicone roof coating require a primer?
Primer requirements depend on the substrate. Porous concrete, metal and certain existing roofing membranes may require different compatible primers. An adhesion test is recommended before full-scale application.
5. Can silicone roof coating be applied over an existing roof?
It may be applied over compatible existing roofing systems after inspection, cleaning and adhesion testing. The existing roof must be sufficiently stable and free from loose or deteriorated materials.
6. Can silicone roof coating be applied over modified bitumen?
Compatibility should be confirmed before application. The existing bitumen roof must be inspected for surface deterioration, loose granules, blistering and contamination. Conduct an adhesion test and follow the approved system instructions.
7. What is the recommended coverage rate?
The supplied theoretical coverage is 0.8–1.2 kg/m². Actual consumption depends on the required dry film thickness, substrate texture, application method and project conditions. Request the official TDS for project-specific calculations.
8. How long does silicone roof coating take to cure?
The supplied reference tack-free time is 2–4 hours at 25°C and 50% relative humidity. The original product information indicates 24–48 hours for full curing. Actual curing time depends on film thickness, humidity, temperature and ventilation.
9. Is silicone roof coating suitable for outdoor UV exposure?
Silicone roof coating is designed for outdoor applications and UV exposure. Actual weathering performance should be evaluated using the manufacturer's product test reports and project requirements.
10. Can silicone roof coating be applied to a damp surface?
The substrate must be free from standing water and condensation. Whether a damp surface is acceptable depends on the specific formulation and application instructions. Confirm the permitted substrate moisture condition before construction.
11. What packaging sizes are available?
The standard supplied packaging is 20 kg per pail. Other packaging and private-label requirements can be discussed according to order quantity.
12. Can CABERRY provide OEM and wholesale silicone roof coating?
Yes. CABERRY can discuss wholesale supply, customized packaging, private-label arrangements and project-based orders for overseas distributors and construction material buyers.
Looking for a 100% Silicone Roof Coating Manufacturer?
Contact CABERRY for technical specifications, product samples, wholesale pricing, OEM solutions and project application support.
We welcome inquiries from roofing contractors, waterproofing material distributors, building material importers and construction project purchasers worldwide.
WhatsApp: +86 13189072286 Email: caberrymay@gmail.comRequest TDS / SDS | Get Wholesale Quotation | Request Product Samples
