CABERRY
Elastic Aliphatic Polyurea Waterproof Coating
Elastic Aliphatic Polyurea Waterproof Coating
Verfügbarkeit für Abholungen konnte nicht geladen werden
Elastic Aliphatic Polyurea Waterproof Coating
Two-Component Aliphatic Polyurea Waterproofing | Caberry Waterproof
Product Overview
Caberry elastic aliphatic polyurea waterproof coating (JBL-200) is a high-performance two-component A+B polyurea system. It features outstanding elasticity, UV stability, weathering resistance and seamless film forming. Suitable for both indoor and outdoor waterproofing, anti-corrosion and decorative protection on floors and walls.
What Is Aliphatic Polyurea Waterproof Coating?
Aliphatic polyurea waterproof coating is a high-performance liquid-applied waterproofing material designed to form a continuous, flexible and seamless protective membrane after curing. This two-component polyurea waterproof coating combines resin component A and hardener component B to create a durable elastomeric coating system.
Compared with conventional aromatic polyurea coatings, aliphatic polyurea technology offers improved resistance to ultraviolet radiation and outdoor weathering, making it suitable for applications where colour stability and long-term exposure performance are important.
As a flexible waterproof coating for concrete and other properly prepared substrates, it can provide a continuous barrier against water penetration while accommodating minor substrate movement. Its actual crack-bridging capacity, chemical resistance and mechanical performance depend on the formulation and applied film thickness.
A+B components designed to form an elastic waterproof coating after proper mixing and curing.
Designed for improved UV and weathering resistance on exposed surfaces.
Forms a continuous coating film without conventional sheet membrane joints.
Suitable for specified building waterproofing and protective coating applications.
Key Advantages
✅ Excellent Elasticity & Crack Bridging
High elastic membrane can follow minor substrate movement and bridge fine cracks.
✅ Superior UV & Weather Resistance
Aliphatic formula, no easy chalking or fading, perfect for exposed outdoor surfaces.
✅ Waterproof + Anti-Corrosion
Integrated protection against water ingress, chemical erosion and corrosion.
✅ Wide Application Scenarios
Works for rooftop, swimming pool, plaza, exterior wall, commercial and residential interiors.
Suitable Substrates for Polyurea Waterproofing
Choosing the correct substrate preparation and primer is essential for achieving reliable adhesion and waterproofing performance. Caberry JBL-200 can be evaluated for the following substrate categories, subject to product compatibility and the approved application system.
Application Scope
- Rooftop floor: anti-corrosion & waterproofing
- Indoor: garage, factory, office, commercial building, hotel, inn, entertainment venue floors & walls
- Outdoor: plaza, swimming pool, exterior facade walls
Polyurea Waterproof Coating Applications in Construction
Different building projects require different waterproofing solutions. This elastic aliphatic polyurea coating can be considered for compatible construction surfaces where a seamless, flexible and weather-resistant coating system is specified.
Roof Waterproofing
For exposed concrete roofs, terraces and other approved roof substrates requiring seamless waterproofing and outdoor weather protection.
Garage & Industrial Floors
For specified concrete floor protection systems in garages, workshops and industrial buildings. Traffic and abrasion requirements should be verified.
Swimming Pool Waterproofing
For compatible swimming pool structures when the complete system has been verified for continuous water immersion, water chemistry and the intended finish.
Balcony & Terrace Protection
For compatible balcony and terrace substrates requiring a continuous waterproof coating layer beneath an approved finishing system.
Exterior Wall Protection
For specified exterior wall surfaces where flexible protective coatings and resistance to outdoor weathering are required.
Commercial Building Projects
For selected commercial and residential construction projects requiring liquid-applied waterproofing and surface protection.
Technical Specifications of JBL-200 Polyurea Coating
For professional waterproofing contractors, distributors, construction material importers and project procurement teams, technical specifications are important when selecting a two-component aliphatic polyurea coating.
The following technical information identifies the main parameters to be confirmed through the official JBL-200 Technical Data Sheet (TDS).
| Technical Parameter | Product Information |
|---|---|
| Product Name | Elastic Aliphatic Polyurea Waterproof Coating |
| Product Model | JBL-200 |
| Chemical System | Aliphatic Polyurea |
| Component | Two-Component A+B |
| Appearance | Confirm according to official TDS |
| Mixing Ratio | Refer to official TDS |
| Application Method | Roller / Brush, subject to product instructions |
| Theoretical Coverage | Refer to target dry film thickness and official TDS |
| Recommended Film Thickness | Confirm according to project requirements and TDS |
| Drying & Curing Time | Refer to official TDS |
| Application Temperature | Refer to official TDS |
| Elongation at Break | Refer to laboratory test results |
| Tensile Strength | Refer to laboratory test results |
| Shelf Life | Refer to product packaging and TDS |
Note: Final technical values, mixing ratio, coverage, film thickness and curing conditions must be confirmed using the latest manufacturer-issued JBL-200 TDS.
Construction Instructions
- For cement substrate: grind the surface flat with professional grinder, remove laitance, oil stains, dust and debris, then vacuum clean thoroughly.
- Primer coat: apply one layer of polyurea primer. It penetrates into cement capillaries to seal pores and improve adhesion of topcoat.
- Topcoat: roll or brush the aliphatic polyurea topcoat once; apply 1–2 coats depending on new or old substrate to achieve uniform colour and full coverage.
How to Apply Two-Component Aliphatic Polyurea Waterproof Coating
Proper surface preparation, primer selection and component mixing are essential for the performance of a liquid-applied polyurea waterproofing system.
Surface Preparation
Remove dust, oil, loose materials and weak surface layers. Repair cracks and defects and ensure the substrate meets the required moisture conditions.
Primer Application
Select a compatible primer according to substrate type and porosity. Allow the primer to reach the specified recoat condition.
A+B Component Mixing
Mix components A and B strictly according to the manufacturer's specified ratio, mixing time and application pot life.
Coating Application
Apply evenly using the recommended application tools. Maintain the specified wet and dry film thickness.
Curing & Inspection
Allow sufficient curing time before water exposure or subsequent finishing. Inspect film continuity, thickness and adhesion.
The mixing ratio, primer type, substrate moisture limit, recoat interval, pot life and full curing time must follow the official JBL-200 application instructions. Do not apply the coating outside the approved environmental conditions.
Polyurea Waterproof Coating Manufacturer & Wholesale Supply
Caberry is a waterproofing materials manufacturer based in Guangzhou, China, supplying waterproof coatings and construction waterproofing materials for international distributors, importers, contractors and building material wholesalers.
For customers sourcing an aliphatic polyurea waterproof coating supplier, JBL-200 can be discussed according to project specifications, target market requirements and purchasing quantities.
Bulk & Wholesale Supply
Discuss wholesale pricing, container orders and project-based procurement requirements.
OEM & Private Label
Discuss customized packaging, private-label branding and product presentation requirements.
Technical Documentation
Request product TDS, SDS/MSDS and available laboratory test reports for technical evaluation.
Project Support
Discuss substrate compatibility, primer selection, application methods and estimated material requirements.
Frequently Asked Questions About Aliphatic Polyurea Coatings
Q: What is the difference between aliphatic and aromatic polyurea waterproof coatings?
A: Aliphatic polyurea coatings generally provide better colour stability and resistance to UV weathering, making them suitable for evaluating exposed outdoor applications. Aromatic polyurea coatings are generally more prone to colour change and chalking under prolonged sunlight exposure.
Q: Is aliphatic polyurea suitable for outdoor roof waterproofing?
A: Aliphatic polyurea technology offers UV and weathering resistance for exposed applications. The suitability of JBL-200 for a specific roof depends on the substrate, surface preparation, primer, specified film thickness and the complete system requirements. Please confirm these details against the product TDS before application.
Q: Does a two-component polyurea coating require a primer?
A: Primer requirements depend on the substrate type, porosity and surface condition. Concrete and metal may require different compatible primers. Please confirm the recommended primer and application procedure with the manufacturer before construction.
Q: How much polyurea waterproof coating is needed per square meter?
A: Material consumption depends on the required dry film thickness, substrate profile and application losses. Send Caberry your project area, substrate details and target thickness so the estimated material quantity can be calculated according to the product TDS.
Q: Can polyurea waterproof coating be applied to concrete floors?
A: JBL-200 can be evaluated for compatible concrete floor applications after suitable surface preparation and primer selection. Required abrasion resistance, traffic load, film thickness and final finish should be confirmed for the specific project.
Q: Can JBL-200 be used for swimming pool waterproofing?
A: Swimming pool use should only be considered after confirming that the complete coating system is suitable for continuous water immersion, pool-water chemistry and the intended finishing layer. Please request technical confirmation from Caberry before specifying the product for a swimming pool.
Q: Can you provide the TDS, SDS and relevant test reports?
A: Please contact Caberry to request the available JBL-200 technical data sheet (TDS), safety data sheet (SDS) and relevant product test documentation for your technical evaluation and project requirements.
Q: How can I get a wholesale quotation for JBL-200 polyurea coating?
A: Send us your required quantity, destination country, packaging requirements and application details through WhatsApp or Email. Our team can discuss product specifications, bulk pricing and available technical documentation.
Looking for a Reliable Polyurea Waterproof Coating Supplier?
Whether you are a waterproofing contractor, building material distributor, importer or project purchaser, contact Caberry to discuss JBL-200 product specifications, wholesale prices, customized packaging and technical support.
Get Quotation & Technical Support
If you need bulk price, custom packaging or construction technical guidance, please contact us directly.
