Water-Based Epoxy Floor Primer

Two-Component Waterborne Epoxy Primer

Caberry waterborne epoxy primer is the supporting penetrating base coat for our waterborne epoxy flooring system. It penetrates into concrete capillaries, seals dust, reinforces weak cement substrates and greatly improves interlayer adhesion between concrete and subsequent epoxy intermediate / topcoat. Low VOC, suitable for hygiene-sensitive industrial and public flooring projects.

• Cement floor priming for furniture factories, food plants, pharmaceutical workshops, cosmetic factories, hospitals and schools
• Seals concrete pores, locks loose cement powder, boosts adhesion of the full epoxy flooring system
• Matches perfectly with Caberry waterborne epoxy mortar, putty and topcoat

1. Mix Component A and Component B thoroughly.
2. Apply evenly onto cement substrate by brush, roller or spray.
3. Waiting time: 3–4 hours before next coating.
4. For low-strength / powdery base: apply two coats of primer.
5. Reference consumption: 0.15 ~ 0.20 kg/m².
6. Important note: The mixed primer must be used up within 1 hour, otherwise it will gel and become unusable.

• Form: A+B two-component waterborne epoxy primer
• Package: separate plastic buckets for A & B
• Storage: sealed, cool and dry; protect from freezing and high heat
• Trade Terms: EXW, FOB Guangzhou, CIF, DDP available

Full documents for import clearance and tender:

• ✅ TDS Technical Data Sheet
• ✅ MSDS / SDS Safety Data Sheet
• ✅ Penetration, adhesion and sealing performance test report
• ✅ Factory quality certificate

Sample policy: Sample cost and freight borne by buyer.

Q: Can this primer be used alone without epoxy topcoat?
A: It can seal cement dust temporarily, but it is designed as base primer. For wear-resistant finished floor, intermediate layer and topcoat are required.

Q: Why must it be used within 1 hour after mixing?
A: Waterborne epoxy system has limited pot life. Once cross-linking reaction proceeds, the liquid will gel and cannot be applied smoothly.

Q: Can it be used with solvent epoxy topcoat?
A: Not recommended. Best performance when matched with our supporting waterborne epoxy mid-coat and topcoat.

Q: What if the concrete surface is damp?
A: It has better moisture tolerance than solvent primer, but standing water must be removed before application.

Q: Can you provide English TDS and MSDS?
A: Yes, complete English technical documents ready for customs clearance.